BoatLIFE

This unique, acid-free formula is safe to use and better for the environment than conventional acid cleaners. The spray and rinse formula eliminates stains caused by rust, calcium, water, scum, and algae. It will clean without etching or damaging the surface. When properly applied Hull Cleaner will not damage anti-fouling paints. Safe to use on fiberglass, metal and wood.

JULY 4TH SPECIAL: BUY 2 HULL CLEANER, RECEIVE 1 FREE BLACK STREAK REMOVER

VALID 6/22/11 UNTIL STOCK DEPLETED

This high-performance spot remover cleans without leaving a sticky residue. The product dries completely and allows soils to be easily vacuumed away leaving carpets clean. Will not damage existing carpet stain resistance. Adds stain guard protection with every use. Non-toxic. Bio-degradable.

JULY 4TH SPECIAL: BUY 2 CARPET SPOT REMOVER, RECEIVE 1 FREE BLACK STREAK REMOVER

VALID 6/22/11 UNTIL STOCK DEPLETED

Removes stubborn black streaks. This spray and wipe formula works instantly. Safe for all surfaces. Will not damage gel coats. Non-toxic and bio-degradable.

JULY 4TH SPECIAL: BUY 2 BLACK STREAK REMOVER, RECEIVE 1 FREE HULL CLEANER

VALID 6/22/11 UNTIL STOCK DEPLETED

Note: Scratch & dent products include any products that have packaging defects such as dents, marred labels or crooked labels. The quality of the content is not compromised by the appearance of the packaging and the directions for usage are readable.

An all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.

Note: Scratch & dent products include any products that have packaging defects such as dents, marred labels or crooked labels. The quality of the content is not compromised by the appearance of the packaging and the directions for usage are readable.

An all-purpose, non-corrosive, non-yellowing, mildew resistant, low-odor, 100% marine high quality silicone sealant. Tack-free in 30 minutes or less. *Fully cured in 24 hours. For use above or below the waterline. Will not shrink, crack, or dry out. Superior flexibility and adhesion to fiberglass, plastic, metal, and wood. Retains flexibility and tensile strength even after years of exposure. Acid free cure will not corrode metal.

Note: Scratch & dent products include any products that have packaging defects such as dents, marred labels or crooked labels. The quality of the content is not compromised by the appearance of the packaging and the directions for usage are readable.

A long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces.

Note: Scratch & dent products include any products that have packaging defects such as dents, marred labels or crooked labels. The quality of the content is not compromised by the appearance of the packaging and the directions for usage are readable.

A long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces.

Note: Scratch & dent products include any products that have packaging defects such as dents, marred labels or crooked labels. The quality of the content is not compromised by the appearance of the packaging and the directions for usage are readable.

A long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted***, and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline, and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied underwater for emergency repairs. Can be applied to damp surfaces.

Note: Scratch & dent products include any products that have packaging defects such as dents, marred labels or crooked labels. The quality of the content is not compromised by the appearance of the packaging and the directions for usage are readable.

A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free. Custom colors available.